 |
- 16% lighter, 11% smaller (Compared with IS1000)
- Service life: 5 million cycles
- Can be connected to modular type F.R.L. units.
More on the IS10 range.
|
|
 |
The IS1000 series is a mechanical style pressure switch. This series
has a long life of 5 million cycles. The surface treatment of the body
for the IS1000 series pressure switch has changed from a black coating
to a black zinc chromate. Function for the new model remains unchanged
from the current one even with the change of surface treatment.
More on the IS1000 range.
|
|
 |
Pneumatic pressure switch series IS3000 can be used for small
electrical loads of 10mA such as relays and programmable controllers.
IS3000 has a high frequency operation of 1 cycle/sec and a long life of
10 million cycles due to piston construction. Calibration ranges from
0.1 to 0.7 MPa.
More on the IS3000 range.
|
|
 |
The ISA series is a non-contact style air catch sensor for applications
requiring confirmation of work present for machining operations. Due to
the construction of the sensor, fluctuations in the supply pressure
does not influence operations. The ISA series is IP66 rated and is dust
proof and drip proof.
More on the ISA range.
|
|
 |
The ISE1 series is a compact, positive pressure switch available in a
single setting with hysteresis adjustment, a double setting/double
output type or an analog output type with hysteresis adjustment. The
ISE1 is lightweight and the optional plug-in connector makes wiring
easy and simple.
More on the ISE1 range.
|
|
 |
Our new ZSE10(F)/ISE10 pressure switches really do fit the bill when
lack of available machine space is an issue. Designed specifically with
space savings in mind, and measuring only 9.8 mm width, they offer
similar performance to our popular ZSE30A/ISE30A models but require
around 50% less mounting space. Further features of these switches
include a copy function where the setting of the master sensor can be
copied on up to 10 slave sensors simultaneously resulting in reduced
setting time and human setting errors. Also, all settings can be
protected against unwanted manipulation using the switch’s password
setting function and with their improved multi –angle direction
visibility; vacuum suction and pressure checks can be made at a glance.
Available in direct, panel and DIN rail mounting options and with side
or rear piping directions, these digital pressure switches really lend
themselves to multiple switch applications when panel space is
restricted. And in keeping with our commitment to help save energy,
these switches are also extremely energy efficient as they consume
around 20% less power thanks to their in-built power saving function.
More on the ISE10 range.
|
|
 |
The ISE2 series is a compact, pressure switch (for positive pressure)
and can be integrated with ZX or ZR vacuum systems. The ISE2 series
pressure switch has a quick response time of 10mS and the plug
connector option makes wiring easy and simple.
More on the ISE2 range.
|
|
 |
The ISE3 series is a digital pressure switch (for positive pressure)
with LCD readout for general pneumatics purposes. The ISE3 digital
pressure switch allows the calibration of two independent outputs.
Modular version can be integrated with ZX system.
More on the ISE3 range.
|
|
 |
Based on our successful ZSE/ISE 30 Series, our new high precision
digital pressure switch, Series ZSE30 A(F) / ISE30A, with dual colour
display, offers even more high performance features. Now available with
either NPN or PNP dual open collector outputs, or with the addition of
an additional analogue output (voltage or current), the sensors
improved copy function also allows you to simultaneously set up to 10
slave monitors whilst setting the master. With a simple to follow three
step setting process and the addition of a password setting function,
potential errors, lengthy setting time and unwanted manipulation are
kept to an absolute minimum. Further features of the CE, UL/CSA and
RoHS compliant ZSE30 A(F) / ISE30A include a power saving function,
which reduces energy consumption by up to 20%, various piping options
and direct or panel mounting capabilities.
More on the ISE30A range.
|
|
 |
Digital Pressure Indication Series
When it comes to setting pressures for optimum machinery performance,
digital pressure indicators provide a highly accurate and visible
solution. SMC have long recognised this trend and with the new addition
of a built-in digital pressure switch to a range of regulators and
filtration products The extensive range of SMC regulators (Series AR),
filter regulators (Series AW), mist separator regulators (Series AWM),
micro mist separator regulators (Series AWD), compact manifold
regulators (Series ARM) and filter regulator combination ranges (Series
AC) can now be ordered with factory fitted digital pressure switches.
With dual colour - green and red, the display colour can be programmed
to change at a predetermined pressure. Additional programmable outputs
and settings are provided to suit specific machine requirements
More on the ISE35 range.
|
|
 |
Based on our successful ZSE/ISE 40 Series, our new high precision
digital pressure switch, Series ZSE40 A(F) / ISE40A, with dual colour
display, offers even more high performance features. Now available with
either NPN or PNP dual open collector outputs, or with the addition of
an additional analogue output (voltage or current), the sensors
improved copy function also allows you to simultaneously set up to 10
slave monitors whilst setting the master. With a simple to follow three
step setting process and the addition of a password setting function,
potential errors, lengthy setting time and unwanted manipulation are
kept to an absolute minimum. Further features of the CE, UL/CSA and
RoHS compliant ZSE40 A(F) / ISE40A include a power saving function,
which reduces energy consumption by up to 20%, various piping options
and direct or panel mounting capabilities.
More on the ISE40A range.
|
|
 |
Model ISE50 is a standard thread type, high precision digital pressure
switch for positive pressure. ISE50 is used for a wide range of fluids.
The stainless steel diaphragm prevents direct contact between sensor
and measured fluid. Sensor and fittings are electro-beam welded.
More on the ISE50 range.
|
|
 |
Model ISE60 is a high precision digital pressure switch for positive
pressure. ISE60 uses special fittings (metal gasket seal fittings) for
the semiconductor industry. The stainless steel diaphragm prevents
direct contact between sensor and measured fluid. Sensor and fittings
are electro-beam welded.
More on the ISE60 range.
|
|
 |
When R&D engineers from leading automation control experts SMC
Pneumatics were asked to develop a compact, high pressure switch,
incorporating a large digital display, to monitor both coolant and
hydraulic fluids – the new Series ISE 70/75 was their perfect response.
Effectively extending the existing SMC pressure switch range, these
high performance, yet lightweight, pressure controls are available in
three options: ISE 70 for use with air or inert and incombustible gases
- monitoring a set rated pressure range between –0.1 to 1MPa, and the
ISE 75 and 75H models for use with fluids requiring a set rated
pressure of up to 10MPa and 15MPa respectively.
With die-cast aluminium bodies and 4 setting control options, the
operating status can be quickly seen, by viewing the highly visible
10mm high character dual colour displays.
Available with 2 or 1 outputs, Rc, NPT or G1/4 port thread options and
with fixed or selectable MPa or PSI pressure indications, these
switches conform to both CE and UL/CSA global accreditations and IP67
enclosure ratings, making them the ultimate solution in high pressure
control.
More on the ISE70/75/75H range.
|
|
 |
To compliment and extend the existing SMC Digital Pressure Switch
ranges, we are pleased to unveil our new Series ZSE/ISE 80 which has
been specifically designed for use with a wide range of fluids thanks
to its improved, corrosions resistant stainless steel, wetted part
construction. Pressure ranges can easily be monitored via its dual
colour display either in Vacuum (-0.1 to 0 MPa), Compound (-0.1 to
+0.1MPa) or Positive (-0.1 kPa to +1 MPa, -0.1 kPa to +2 MPa) regimes,
dependant on its application, and with the option of an analogue
current output, this new switch makes remote location mounting a
perfect selection.
More on the ISE80 range.
|
|
 |
ISG General Purpose Switch is widely used in machine tools, industrial machines, compressors, chemical plants, power plants, machineries and for automatic pressure control such as hydraulic, water, liquid and atmospheric pressure.
More on the ISG range.
|
|
 |
The air checker, PS1 series, electronic pressure switch is available
for positive pressure and for vacuum. PS1 is extremely compact and
lightweight. Dimensions are 13W X 10H X 30L (mm) for standard type
without connection part. A 2-wire switch is applicable to either NPN or
PNP output.
More on the PS1 range.
|
|
 |
Series PSE digital pressure switches allow pressure to be controlled
from a remote location. Series PSE510 is compact and lightweight,
allowing the sensor to be mounted where needed. The use of stainless
steel for all wetted parts (SUS630 for diaphragm, SUS304 for fitting)
allows the PSE520 pressure sensor to be used in a wide variety of gas
and fluid applications.
More on the PSE range.
|
|
 |
PLEASE ADD TEXT
More on the PSE200 / PSE 530 range.
|
|
 |
PLEASE ADD TEXT
More on the PSE300/ PSE 540 range.
|
|
 |
PLEASE ADD TEXT
More on the PSE550 range.
|
|
 |
PLEASE ADD TEXT
More on the PSE560 range.
|
|
