Series AF modular style air filter is a cost effective, clean looking
solution to your filtration needs. Its' modular design allows
connection with other SMC air preparation equipment. The series is
available in six size options with a wide range of accessories.
More on the AF range.
Micro mist separator series AFD is available in 3 sizes; 1/4 (20), 3/8
(30) & 1/2 (40). Rc(PT), PF & NPT threads are available. Port
sizes range from 1/8 to 3/4. Accessories include bracket, float type
auto drain, and differential pressure type auto drain.
More on the AFD range.
Series AFF is mounted to main piping to remove impurities like oil,
water and foreign matter in compressed air. No screw threads or tie
rods are required; therefore, removal and replacement of the element is
made quick and easy. Series AFF improves the function of downward
dryers, extends the life of precision filters and prevents trouble with
More on the AFF range.
Series AFM Modular Style Mist Separator is a cost effective, clean
looking solution to your filtration needs. The standard filtration is
0.3µm with a 95% particle size collection rate. The modular design
allows connection with other SMC air preparation equipment. Use in
combination with the AF series to meet your clean room filtration
requirements. The AFM is available in 3 size options.
More on the AFM range.
Series AM can separate and remove oil mist in compressed air, which is
difficult to remove by ordinary air filters and removes solid particles
such as rust or carbon of more than 0.3 micron. It is the most suitable
for air sources that drive pilot, metal seal solenoid valves.
More on the AM range.
Series AMD can separate and remove aerosol state oil mist in compressed
air and remove carbon or dust of more than 0.01um. It should be used as
prefilter for compressed air in precision instruments or for clean room
More on the AMD range.
Series AME separates and absorbs aerosol state fine oil particles in
compressed air and changes the oil lubricating compressed air to
oil-free equivalent air. It should be applied for filtration of
compressed air requiring high cleanliness for coating lines, compressed
air for clean rooms and compressed air for equipment necessary to avoid
More on the AME range.
Series AMF odor removal filter efficiently removes odor in compressed
air with an activated carbon element. The unit is designed for use in
food processing, pharmaceutical, brewing and breathing systems where
odor must be removed.
More on the AMF range.
The AMG series water separator is installed on the air pressure line to
remove water drops from compressed air. It is available in 7 sizes with
a variety of optional combinations to meet your application
More on the AMG range.
Series AMH is a high precision, micro-mist separator combined with a
prefilter. The AMH can separate and eliminate aerosol state oil mist in
compressed air and remove carbon or dust of more than 0.01micron. The
AMH series is suitable for drying/cleaning pneumatic measurement
instruments (air micrometer) and precision parts.
More on the AMH range.
Series AMJ is effective for removing water droplets from the air sucked
into vacuum pumps and ejectors. Over 90% of droplets can be removed
through the use of a special water droplet removing element. The
provision of a drain cock makes it possible to discharge the drain
manually after breaking the vacuum. Even when the element is saturated
with water, there is almost no drop in pressure (increase in
More on the AMJ range.
A low maintenance filter, series FN1 eliminates the need for element
replacement. SMC's unique element construction is composed of a series
of grooved filter plates and wave washers placed one above the other.
When compressed, the gaps between the filter plates and wave washers
filter foreign matter. When decompressed, the element widens the gap
between the filter plates and wave washers, allowing dust and foreign
particles caught between the plates to be washed away. The gaps between
the filter plates are equally maintained by the wave washers to allow
stable back-flush operation.
More on the FN range.
Quick change filter series FQ1 requires no tools for replacement of the
element. Element replacement, including removing liquid, can be
accomplished in less than 2 minutes. Element sizes include 125mm, 250mm
and 500mm. Materials include PP, cotton, SUS304 (epoxy resin) and
SUS316 (nickel solder). Other elements are available as made-to-order.
More on the FQ range.
Clean air or nitrogen applications requiring high levels of filtration
accuracy now have an outstanding solution thanks to development
engineers from SMC, the world leaders in automation solution and their
new Series SFD clean air filter.
Designed for clean air environments, the SFD provides filtration
efficiency of 99.9% accuracy thanks to its built-in hollow fibre
membrane with a nominal filtration rate of 0.01µm. Available in both
disposable and cartridge types and with either plastic or metal case
options, the filter can effectively operate with flow rates of between
60 to 500 l/min ranges. For ease of operation the cartridge options can
be quickly disassembled allowing simple replacement of the hollow fibre
filter element and the standard clear resin case, which is resistant to
alcohol based cleaning fluids, provides fast visual detection of the
filter´s status. In the metal case options, the SFD can be ordered in
either aluminium or stainless steel which are ideal for use in
atmospheres exposed to organic solvents and chemicals.
Manufactured and quality checked in clean room environments, the SFD
filter is available with two types of piping ports for use with either
SMC´s KP fittings or similar clean one-touch or threaded female fitting
More on the SFD range.