 |
Series S070 is a super compact direct acting 2/3 port solenoid valve
that meets the miniaturisation needs of analysers, medical equipment
and semiconductor manufacturing equipment. S070 is extremely
lightweight (5g for valve single unit type) and operation noise is
38dB(A) or less. It is easy to increase or decrease the number of
stations (stacking base). Valve width is 7mm.
More on the S070 range.
|
|
 |
Machine tool operations using high pressure coolant for lubrication and
swarf removal now have the perfect solution following the launch of our
new Series SGH coolant valve range. Developed to renew our VNH valve
range, Series SGH is a range of ISO/CE accredited high performance 2/3
port valves which are ideal for high speed grinding applications and
lengthy drilling operations where the build-up of heat and swarf can be
a major problem. Designed to operate with flow rates of between 0 and
7MPa, Series SGH has a life expectancy in excess of 3 million cycles
and thanks to its unique construction, which incorporate a V116 pilot
valve, water hammer has been reduced considerably, higher flow rate has
been achieved and energy consumption is now only 0.54W when selecting
the 24v DC, with light/surge voltage suppressor option. Further
features include an in-built filter in the P port to prevent any
contamination entering the valve and the use of fluorine rubber, low
condensate ozone resistant, parts in the pilot valve. Available in
conduit terminal, DIN connector or M12 connector power supply options,
Series SGH valves are lower in height but still fully interchangeable
with our VNH range.
More on the SGH range.
|
|
 |
Series SJ3A6 is a vacuum release valve equipped with a restrictor to enable flow rate adjustment of release air. This space saving series is 10mm wide, designed in a cassette type format and uses a card-edge type connector. The SJ3A6 valves are compatible with Serial Interface units for both CC-Link and DeviceNet protocols.
More on the SJ3A6 range.
|
|
 |
Series SY offers major advances in valve performance for cost-effective
solutions to your requirements. The series offers high flow with low
power consumption in a compact design. The SY is available in body
ported or base mounted styles and can be used individually or manifold
mounted.
More on the SY - 3 Port range.
|
|
 |
The SYJ Valve is an innovative combination of space efficiency and
performance superiority which provides real value to the design
solution. Whether designed in a manifold or used as a single valve,
this small profile increases design flexibility and minimizes space
requirements. The SYJ valve utilizes a low power (0.5 watts standard)
pilot solenoid design, which dramatically reduces thermal heat
generation. This improves performance, decreases operating costs, and
allows for direct control by PLC output relays. All electrical
connections for SYJ Valves are available with lights and surge
suppression. SYJ series valves can be configured on base mounted
manifolds, or individually on subplates, creating a variety of
solutions to meet your broadest engineering needs.
More on the SYJ - 3 Port range.
|
|
 |
Customers looking for a compact, light - weight, high flow valve for
piloting process valves or actuator applications, need search no
longer. Following extensive research and development, world leaders SMC
Pneumatics have launched their latest Series V100 - one of the most
advanced solenoid valves in todays market. Designed with a
revolutionary magnetic circuit and exterior cover, the V100´s machine
free and environmentally friendly construction allows
the coil to
increase its force by 160%.In addition, energy savings are generated
from the valves progressive low power consumption. The Standard V100
uses only 0.35 w which is 76% less than comparable valves and the Low
Power model uses only 0.1 w, reflecting; dramatic savings of up to 93%
compared to existing products. Available in 3, 5, 6, 12 and 24 VDC
options, Series V100
has a valve pitch of just 10mm and an overall
height and length of 24.7mm and 27mm respectively and is probably one
of the smallest pneumatic valves currently available. Weighing in at a
mere 12 g and with flow rates of between 8.4; and 24 l/minute, its the
perfect solution when space, performance and component weight is
critical.
More on the V100 range.
|
|
 |
Process Industry and PET machine builder's requests for both 2 and 3
port, pilot operated, solenoid valves, with high pressure performance
are now answered with the launch of SMC's latest Series VCH range.
Designed for use with air or inert gas, these new valves can operate up
to a maximum pressure of 5.0 MPa thereby substantially exceeding SMC's
existing VXH high pressure series. With large flow passages, and
ISO1179-1 conforming port thread sizes of G1/2 to G1, high flow rates
are ensured and due to a reduction in the overall volume of the pilot
chamber their responsiveness can now only be measured in milliseconds.
Additionally, the VCH range offers enclosure protection equivalent to
IP65 and a DIN type electrical connector as standard and due to its
unique collision-less armature construction, with rubber buffers and
urethane diaphragm, early indications have confirmed that the valves
operation life time will exceed 10 million cycles.
Currently the VCH Series is available in four different valve
configurations; 2 port valve normally closed - VCH41, 2 port valve
normally open - VCH 42, our 3 port option - VCH410, plus a check valve VCHC40.
More on the VCH range.
|
|
 |
The VDW200/300 series is a compact, direct operated, 3 port solenoid
valve for water, air and vacuum. The use of a unique magnetic material
reduces the operating resistance of moving parts, improving service
life, wear and corrosion resistance.
More on the VDW 10/20/30/200/300 range.
|
|
 |
Series VG342 is a 3 port pilot poppet solenoid valve and can be used as
a selector or divider valve (external pilot). Actuation is changeable
between N.C., N.O., or external pilot types. VG342 is possible to use
in vacuum or under low pressures. No lubrication is required.
More on the VG range.
|
|
 |
Universal porting.
Available for N.C. valve, N.O. valve, divider valve, selector valve, etc.
Nl/min: 196.
Compact/Width 18 X Length 63 (mm).
Low consumption 4W.
DC (Standard).
2W DC (Low wattage style).
Applicable for vacuum use 101.2kPa.
Copper-free specifications standard.
The portions that come in contact with fluids do not contain copper, thus enabling the standard product to be used as is.
More on the VK range.
|
|
 |
Compact with large flow rateBody width 18mm:
Nl/min 245 (Standard: Base mounted type) Nl/min 196 (Standard: Body
ported type).
Can be used for vacuum(101.2kPa):(valve leakage 1.8 Nl/min or less
with He)Can be used in vacuum/release circuits.
Universal porting type: N.C./N.O. type can be switched by supplying air
to port 1(P) or 3(R).2 way valves and selector valves can also be
freely used.
Ozone resistant(Series 80-): FKM (fluororubber) is used for the
fluid-contact rubber materials, allowing use even in ozone
environments.
Various manifold piping directions: Output port: Manifold set-up
allowing 360° rotation of 2(A) entry direction (in 90° increments).
Easy manual operation : Since manual overrides are located in 2
directions, on the top and on the side of the valve, manual override
operation is possible unaffected by mounting space and piping
direction, etc.
More on the VKF range.
|
|
 |
High flow capacity:Cv1.0 (VP300), Cv2.3 (VP500), Cv4.0 (VP700). Low
power consumption: 1.8W(DC).Possible to use as either selector valve or
divider valve.
Changeable from normallyclosed style to normally open style. Vacuum
applicable: Up to –101.2kPa.
More on the VP range.
|
|
 |
VQ valves are ideal for applications requiring high speed, frequent
operation, stable response time and long service life. Innovative
mounting methods allow valves to be changed without entirely
disassembling the manifold. Built-in one-touch fittings save piping
time and labor.
More on the VQ - 3 Port range.
|
|
 |
Series VQZ base mount solenoid valves combine convenience with
durability and performance in a more traditional mounting style. Series
VQZ Body Ported Solenoid Valves combine flexibility with high
performance and long life in an inline body style.
More on the VQZ - 3 Port range.
|
|
 |
Large Flow Capacity, yet Compact Size.
Low Power Consumption.
Suitable for Use in Vacuum Applications.
1 Valve, 6 Functions. (Universal Porting)
Selective porting can provide 6 valve functions,
such as N.C. valve, N.O. valve, Divider valve, Selector valve etc.
Manifolded valve can be easily converted
from N.C. normally closed to N.O. normally open merely by turning over the switch cover.
More on the VT range.
|
|
 |
Machine builders looking for a small, extremely compact, valve manifold
unit for use with air operated 3 Port solenoid valves now have the
solution with the launch of SMC´s new Series VV061.
Developed initially following Life Science Industry requests and
particularly suitable for pilot valve and small actuator and pin
cylinder applications, SMC´s R&D engineers have created a fully
integrated manifold which incorporates the valves, printed circuit
board and fittings in one, single, compact unit.
Designed for use with SMC´s 6mm wide V060 valves, in either four or
eight valve configurations, the complete unit only measures 38.6mm
wide, 31.5mm deep and either 26mm or 38mm high respectively. Weighing
only 75grams or 47grams dependant on the selected model the, CE, UL and
CSA compliant, VV061 can be ordered with either 2mm one-touch or 4mm
barb type fittings.
Suitable for either panel or bracket mounting depending on your needs,
ease of maintenance is also ensured as the manifold can simply be
detached from the piping plate and electrical connector cable. V060
valve options include both standard 0.5W and low consumption power
saving 0.23W models which are particularly useful for lengthy
continuous applications.
More on the VV061 range.
|
|
 |
Following Electronic and Semiconductor Industry requests for a compact
manifold unit with integral 3-port solenoid valves, we are pleased to
launch our new Series VV100 Integrated Manifold Unit. Designed with
space-saving and ease-of-use in mind, our R&D engineers have
cleverly integrated two single 3-port solenoid valves into each valve
station thereby reducing the unit’s overall dimension. By adopting this
unique feature, VV100 manifold units can now be built up to 146.4mm in
length by simply changing the length of the manifold’s tie rod and by
adding or removing the number of plug-in (D-sub connector) or hard
wired valve stations. Energy saving has also been considered as
individual valves can be ordered with a power saving circuit, reducing
the energy consumption from 0.4W as standard; to only 0.15W when using
the continuous duty model. And as each valve can be manually turned
off, safe maintenance is guaranteed. Series VV100 is suitable for both
direct or bracket mounting and can also accommodate various piping
sizes including our miniature 2mm one-touch fittings.
More on the VV100 range.
|
|
 |
The VZ series consists of 3 port solenoid valves with rubber seals.
Base mounted and body ported valves are available with standard, flat
cable, DIN rail mounted plug-in and non plug-in manifolds. Various
options are available. The VZ series is still available although direct
replacements for each series have been implemented. See individual
series information for replacements.
More on the VZ range.
|
|
|
