 |
The CRA1 rack & pinion rotary actuator offers very high
torque-to-size and accurate positioning. Bore sizes are 30, 50, 63, 80
and 100mm. Units may be ordered auto-switch capable and with cushions.
Dimensions range from 3" X 4" X 2" to a maximum of 8" X 9.65" X 4.41".
Single shaft end or double shaft end models are available.
More on the CRA1 range.
|
|
 |
n our pursuit of excellence in size and weight reduction, we proudly
announce the release of the CRJ series, mini-rotary actuator. A new
compact body design not only reduces overall space requirements, but
also achieves space savings in wiring and piping. Ease in mounting is
maximized thanks to the merits of the new compact body. Large roller
bearing and large diameter output shaft add to overall compactness
while ensuring high rigidity.
More on the CRJ range.
|
|
 |
The CRQ2 series is a compact rotary, rack and pinion style actuator.
Single and double shaft types are available in all sizes (10~40mm).
The CRQ2 uses internal cushioning and the body can be used as a flange.
The use of a double piston eliminates backlash. CRQ2X low speed rotary
actuator is also available. Auto switches are available.
More on the CRQ range.
|
|
 |
The MSQ compact rotary table is ideal for material transfer
applications. It incorporates load bearings and a mounting face with a
rack-and-pinion style rotary actuator. The seven sizes are 10, 20, 30,
50, 70, 100, and 200 with rotational adjustments from 0-190 degrees,
and auto switch capability. Additional features include a hollow shaft
and direct load mounting possibility. MSQX low speed rotary table is
also available.
More on the MSQ range.
|
|
 |
Manufacturers who incorporate work piece selection or separation in
their production process now have a unique, cost effective, solution
thanks to development engineers from SMC, the world’s leading
automation experts, and their new 3-position rotary table, Series MSZ.
This latest rotary actuator can be adjusted to stop at three different
positions within a 190º radius and does not require either a electric
motor or any complex machinery to function, only compressed air.
Designed initially for the selection and separation of work pieces to
either the left or right, the rotary table is controlled via a single
3-position solenoid valve ensuring simple setup and operation.
Currently available in two model types – basic and high accuracy, for
higher loads and reduced table deflection, – Series MSZ can be ordered
in four different sizes and are designed to work with an operating
pressure range of between 0.2 to1 MPa.
With an allowable kinetic energy of 7, 25, 48 and 81 mJ and an
effective torque at 0.5MPa of 1, 2, 3 and 5 Nm respectively, a load can
be mounted directly on the table for simplicity.
More on the MSZ range.
|
|
|
