 |
The C75 series air cylinders offer a simple, space saving design with
high dimensional accuracy, making these cylinders very easy to use.
Large spanner flats on the rod and head covers greatly simplify their
installation and positioning. Low friction and the standard elastomer
cushion rings allow piston speeds up to 1500mm/sec. Greater side loads
are allowed due to the close tolerance of the piston rod in the
front-end bush.
More on the C75 range.
|
|
 |
The C76 series air cylinders offer a simple, space saving design with
high dimensional accuracy, making these cylinders very easy to use.
Large spanner flats on the rod and head covers greatly simplify their
installation and positioning. Low friction and the standard elastomer
cushion rings allow piston speeds up to 1500mm/sec. Greater side loads
are allowed due to the close tolerance of the piston rod in the
front-end bush.
More on the C76 range.
|
|
 |
The C85 series conforms to ISO 6432 and CETOP RP52P. The C85 is
available in bore sizes 8mm through 25mm with standard strokes ranging
from 10mm through 300mm. A unique rod packing design prevents entry of
dust and the effectiveness of the seal is such that the C85 is suitable
for use in extremely dusty environments. With abrasion resistant
packings and replaceable nose seals, the C85 offers exceptional service
life.
More on the C85 range.
|
|
 |
The CJ1 series micro cylinder is ideal for completing small, delicate
tasks. The barb on the cylinder cap will accept either millimeter or
inch size tubing. The fitting on the rod cover side has been provided
with a variable piping direction. Don't allow space constraints to
cramp your design. Available with a basic mounting option.
More on the CJ1 range.
|
|
 |
Series CJ2 miniature cylinders available in spring return, spring
extend, or double acting offer stainless steel tubing and stainless
steel rods. The series is available in bore sizes 6, 10, 16mm and
stroke lengths from 1/2" to 8". Mounting options include basic, foot,
front flange, and double rear clevis. Series CJ2 is auto switch capable
More on the CJ2 range.
|
|
 |
Series CJ5-S is a stainless steel cylinder, designed for use in
environments with water spray (such as food processing machines). A
special scraper (standard) prevents water from entering the cylinder.
Non-toxic additives allow confident use in equipment for food, beverage
and medical products, etc. The CJ5-S series can be disassembled for
replacement of seals.
More on the CJ5-S range.
|
|
 |
Series CM2 stainless steel cylinders are compact, lightweight and offer
high performance. Improved piston seal and rod seal greatly improve the
unit's life. Rubber bumpers are standard. The CM2 series offers a
variety of mounting options and is auto switch capable.
More on the CM2 range.
|
|
